BOXLIGHT CD-40m User's Guide download pdf (Page 17)

Setting up the Projector

IGURE 8

Connecting the projector to a video player using an S-video cable and the audio con-

nectors on the standard A/V cable

Plug the A/V cable’s white connector into the left “audio out”

port on your video player. Plug the cable’s red connector into

the right “audio out” port on the video player (Figure 7 and

Figure 8).

CAUTION: Your video player

may also have a “Video Out” port

for a coaxial cable connection.

DO NOT use this to connect to the

projector.

•

If you’re using an S-video cable, the yellow connectors on

the A/V cable remain unused (Figure 8).

Plug the A/V cable’s other white and red connectors to the

left and right “audio in” ports on the projector.

The projector is compatible with these major broadcast video

standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, and SECAM.

It automatically adjusts to optimize its performance for the

incoming video. The input signals for SECAM, PAL-M, and

PAL-N video are similar to other video signals and cannot be

automatically detected, therefore they must be chosen manually.

See “Video Standard” on page 23 for details.

A/V cable

S-video cable

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 60 61

No comments

BOXLIGHT CD-40m User's Guide Page 17