BOXLIGHT CD-40m User's Guide download pdf (Page 16)

Connecting a Video Player

If your video player uses a round, one-prong composite video

connector, you’ll need only the A/V cable that shipped with

the projector.

•

If your video player uses a round, four-prong S-video con-

nector, you’ll need an S-video cable in addition to the A/V

cable. The S-video cable is sold separately. (See “Optional

Accessories” on page 40.)

Plug the A/V cable’s yellow connector into the “video-out”

port on your video player (Figure 7). This port may be labeled

“To Monitor.”

•

If you’re using an S-video cable, connect it to the “s-video

out” connector on the video player (Figure 8).

Plug the other yellow connector into the composite connector

on the back of the projector.

•

If you’re using S-video, plug the other end of the cable into

the “s-video” connector on the projector (Figure 8).

FIGURE 7

Connecting the projector to a video player using the standard A/V cable (with composite

video connector)

audio/video cable

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 60 61

No comments

BOXLIGHT CD-40m User's Guide Page 16