BOXLIGHT MP-355m Instruction Manual download pdf (Page 48)

Maintenance & Troubleshooting

CAUTION: Never operate the

projector with the lamp cover open

or removed. This disrupts the air

flow and causes the projector to

overheat.

Loosen the two non-removable screws on the outside of the

module (Figure 30).

Remove the module (Figure 30).

FIGURE 30

Removing the lamp module

WARNING: Do not drop the

lamp module or touch the glass

bulb! The glass may shatter and

cause injury.

Align the new lamp module in the correct direction.

Gently push the module in as far as it goes.

Tighten the screws on the outside of the module.

Reposition the lamp cover.

Tighten the lamp door screw.

Plug in the power cord and turn the projector back on. The

lamp monitor light and lamp hour counter in the Status menu

are automatically reset.

Downloaded From projector-manual.com Boxlight Manuals

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 73 74

No comments

BOXLIGHT MP-355m Instruction Manual Page 48