Boxlight CD-450m User Manual download pdf (Page 38)

Using the Projector

Controls Menu

FIGURE 21

Controls menu

Video Standard

NOTE: If you already know the

video standard used in your

geographical area, it’s often best to

manually select it.

When Video standard is set to Auto, the projector attempts to

pick the video standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N,

or SECAM) automatically based on the input signal it receives.

(The video standard options may vary depending on your region

of the world.) The input signals for SECAM, PAL-M, and PAL-N

video cannot be automatically detected, therefore they must be

chosen manually. If the projector is unable to detect the correct

standard, the colors might not look right or the image might

appear “torn.” If this happens, manually select a standard by

clicking either mouse button and cycling through the standards.

Standby Time

This option lets you select how long the lamp stays on and the

blank screen is displayed when the projector enters standby

mode before the projector turns off. Select among 1, 5, 10, and 15

minutes and 1 and 2 hours by clicking either mouse button and

cycling through the options.

Ceiling Projection

NOTE: To order the Ceiling

Mount, refer to “Optional

Accessories” on page 46.

When you turn

Ceiling Projection

on, the projector turns the

image upside down for ceiling-mounted projection. Highlight

Ceiling Projection, then click either mouse button to turn this fea-

ture on and off.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 69 70

No comments

Boxlight CD-450m User Manual Page 38