BOXLIGHT XD-10m User's Guide download pdf (Page 19)

Setting up the Projector

IGURE 8

Connecting the projector to a video player using an S-video cable and the audio cable

and adapter

NOTE: The audio adapter is

provided so that the same audio

cable used to connect a computer

can be used with the adapter to

connect a VCR.

Plug the audio adapter’s white connector into the left “audio

out” connector on your video player. Plug the adapter’s red

connector into the right “audio out” connector on the video

player (Figure 7 and Figure 8).

Plug the audio adapter’s other end into the audio cable.

Plug the audio cable into the “audio in” connector on the

projector.

CAUTION: Your video player

may also have a “Video Out”

connector for a coaxial cable

connection. DO NOT use this to

connect to the projector.

The projector is compatible with these major broadcast video

standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, and

SECAM. It automatically adjusts to optimize its performance for

the incoming video. The input signal for SECAM video is similar

to other video signals and cannot be automatically detected,

therefore SECAM must be chosen manually. See “Video Stan-

dard” on page 24 for details.

audio cable

S-video

audio

adapter

cable

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 60 61

No comments

BOXLIGHT XD-10m User's Guide Page 19